| | | | |

DOE Publishes Final Rule for Ceiling Fan Test Procedures

DOE 125x86

 

DOE 400x275August 30, 2022

The U.S. Department of Energy (DOE) has published a Federal Register notice amending the test procedures for ceiling fans. Highlighted changes include:

  • a definition for “circulating air” for the purpose of the ceiling fan definition;
  • ceiling fans greater than 24 feet within the scope of the test procedure;
  • certain belt-driven ceiling fans within the scope of the test procedure;
  • specify that certain very small-diameter ceiling fans are not required to be tested;
  • maintain applicability of the standby power test procedure to large-diameter ceiling fans;
  • specify instructions for testing ceiling fans with certain accessories or features;
  • clarify test voltage for large-diameter ceiling fans;
  • amend the low-speed definition and increase low-speed tolerance for stability criteria;
  • permit an alternate set-up to collect air velocity test data and provide greater specificity regarding sensor orientation;
  • amend the blade thickness measurement requirement; update instrument measurement resolution, represented values, rounding instructions, and enforcement provisions;
  • and codify current guidance on calculating several values reported on the EnergyGuide label.

DOE is also updating references to an industry test standard to reference the latest version.

Effective Dates

The effective date of this rule is September 15, 2022. The final rule changes will be mandatory for product testing starting February 13, 2023.

The docket, which includes Federal Register notices, webinar attendee lists and transcripts, comments, and other supporting documents/materials, is available for review here. All documents in the docket are listed here. However, some documents listed in the index, such as those containing information that is exempt from public disclosure, may not be publicly available.

A link to the docket web page can be found here. The docket web page contains instructions on how to access all documents, including public comments, in the docket.

Related Articles


Latest Articles

  • 3D Printing: Inside Lighting’s Next Revolution

    3D Printing: Inside Lighting’s Next Revolution

    While 3D printing in mass production was once a dream, advancements in the technology have moved it more into the mainstream. The technique, which is also referred to as additive manufacturing, has rapidly evolved from a niche prototyping tool into a transformative production method for many sectors, including the lighting industry. As manufacturers confront supply‑chain Read More…

  • LINX Lighting + Controls Names David Komonosky as Principal

    LINX Lighting + Controls Names David Komonosky as Principal

    Costa Mesa, Calif.-based LINX Lighting + Controls has added to its executive leadership team with the appointment of David Komonosky, LEED AP, as Principal. Widely regarded an influential and forward‑thinking leader in the architectural lighting and controls industry, Komonosky’s appointment marks a pivotal moment for LINX. With more than 30 years of industry experience, Komonosky Read More…